User Manual

14
76490013 DECAL, MAIN INST PANEL
2 Warning, Safety and Instructional Decals
• Specific safety warning decals are located on the equipment near immediate areas of potential
hazards.
• Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional
decals.
• Replace worn, damaged or missing safety decals.
• If an attachment or accessory has been installed, make sure current safety decals are visible.
1. Blade engage/disengage switch 2. Ignition switch, Off
3. Ignition switch, Run 4. Ignition switch, Start
5. Apply parking brake to start
3 Specifications
Engine
• See your engine owner’s manual
• RPM: Full speed 3600 +/- 50 RPM (no load) / Idle: 1550 RPM
Electrical System
• Charging System: Internal stator coil
• Battery Type: Maintenance free
• Battery Voltage: 12 Volts
• Fuses: Two, 20 amp blade type
1
2
3
4
5
76490005 DECAL, THROTTLE/INSTRUCTIONS
Throttle, Fast/Full
Throttle, Slow/Idle
Steering controls
76460001 DECAL,
DANGER BLADE
HAZARD
76490001 DECAL,
SHIELD MISSING
76490053 DECAL,
PARKING BRAKE