User Manual

27
• Remove the blade nut by turning counterclockwise.
• Install new or re-sharpened blade. (Ensure the blade spacers are reinstalled with the same qty and
location)
• Torque blade bolt to 70-80 ft/lbs / 95-108 Nm
6.13 Transporting
Use a heavy duty trailer or truck to transport the Sport X. Lock brake and block wheels. Securely fasten the
unit to the trailer or truck with straps, chains, cable or ropes.
• Fasten unit to trailer or truck using tie down locations shown in photos.
6.14 Fuel Evaporation System
All Wright Sport X’s need to have this mandatory feature.
• Do Not alter or remove.
• Do Not fill past the “Max Fill Level” line.
• Over-filling could result in clogging the roll-over vent and/or
contaminating the purge canister.
• The vapor canister is located under the dash.
• Inspect and clean dust filter every 500 hrs or annually
Front Tie Down Location
Rear Tie Down Location
Dust Filter
Vent /
Purge
To
Tank
Max Fill