Manual

23
6.9 Battery Service
The battery is 12 volts and is a maintenance free battery. Charge the battery only if it will not start the mower
properly. Remove the battery from the mower
before charging. Follow the instructions of the
battery charger for proper and safe charging of
the battery.
6.10 Cutting Blades
In order to maintain the best cut, it is important that the blades are well sharpened and not damaged. Bent or
cracked blades or blades with large nicks need to be replaced. Blades must be balanced after sharpening.
To change the blades:
• Stop engine, remove the key and wait for all moving parts to stop.
• Engage the parking brake
• Lift front of mower and secure in the raised position with jack stands.
• Remove the blade bolt by turning counterclockwise.
• Apply anti-seize to the blade bolt.
• Install new or re-sharpened blade, start mounting bolt by hand. (Ensure the blade spacers are
reinstalled with the same qty and location)
• Torque blade bolt to 70-80 ft/lbs / 95-108 Nm
6.11 Transporting
Use a heavy duty trailer or truck to transport the Sport RH. Lock brake and block wheels. Securely fasten
the unit to the trailer or truck with straps, chains, cable or ropes.
• Fasten unit to trailer or truck using tie down locations shown in photos.
Front tie down location Rear tie down location
Hold
Down
Neg.
Terminal
Pos.
Terminal