Owner's manual

76490030,

DECAL

MAIN INST. PANEL

2 Warning, Safety and Instructional Decals

• Specific safety warning decals are located on the equipment near immediate areas of potential hazards.

• Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional decals.

• Replace worn, damaged or missing safety decals.

• If an attachment or accessory has been installed, make sure current safety decals are visible.

1. Blade engage/disengage switch 2. Ignition switch, Off

3. Ignition switch, Run 4. Ignition switch, Start

5. Apply parking brake to start 6. Hydraulic oil access

3 Specifications

Engine

• See your engine owner’s manual

• RPM: Full speed 3600 +/- 50 RPM (no load) / Idle: 1550 RPM

Electrical System

• Charging System: Internal stator coil

• Battery Type: Maintenance free

• Battery Voltage: 12 Volts

• Fuses: Two, 20 amp blade type

76490031 DECAL CE THROTTLE INSTRUCTIONS

Throttle, Fast/Full

Throttle, Slow/Idle

Steering controls

76460001 DECAL,

DANGER BLADE HAZARD

76490001 DECAL,

SHIELD MISSING

76490053 DECAL,

PARKING BRAKE