Manual

14
Critical Application Models
Thread
Locker
Torque
Range (ft-lbs)
Wheel motor bolts (Securing motor
to support)
Small Stander Loctite 2760 40-50
Clutch to engine shaft All Models Loctite 2760 50-55
Wheel hub to wheel motor Small Stander (12P) N/A 138-158
Wheel lug nuts All Models N/A 80-90
Split Hub (Spindle & Drive) (Gr 8) All Models N/A 13-17
Blade Bolts All Models N/A 70-80
Width, deflector down 45.5"
Width, deflector up 33.5"
Length 58"
Height 47"
Weight 605 lbs
Width, deflector down 48.5"
Width, deflector up 36.5"
Length 60"
Height 47"
Weight 620 lbs
Width, deflector down 54.5"
Width, deflector up 42.5"
Length 63"
Height 47"
Weight 630 lbs
32" Stander
36" Stander
42" Stander
Fuel System
• Capacity: 5.6 Gal. (L)
• Type of Fuel: Unleaded regular gasoline, minimum 85 octane. Do not use gasoline containing
more than 10% ethanol. Do not mix oil with gasoline.
• Fuel Filter: In line
• Fuel shut off: On, Off located on fuel tank
Safety Interlock System
• PTO switch must be disengaged, brake engaged and the control handles in the neutral and
locked position to start the engine.
• Operator must have feet on the platform to engage the PTO or engine will stop.
Drive System:
• Two Hydro Gear 10cc variable displacement piston pumps
• Two Hydro Gear 12cc wheel motors
• Speed (mph): Fwd. 7.5 / Rev. 4.3
Hydro Oil System
• Hydro Oil: fully SYNTHETIC motor oil: Mobil-1 15W-50
• Hydro Filter: Spin-on, 25 micron, no bypass / PN 34490002
• Total Capacity: 2.5 qts
• Tank Fill Level: Fill until fluid comes from fill port.
Torque Specifications