User's Guide

HMG1 Module Hyperion User Guide vX | HMG1 190221 www.wrensolutions.com Page 9 of 12
Input – One or more registered Input devices are used to
trigger a system response.
a. For Input type events, click Edit next to Stage 1.
b. Select the Input(s) and associated duration an input
should be active to trigger a response.
c. Select the Output Group to be used in the response
and the duration of response.
d. Click Save.
e. Optionally, click Add Stage and repeat steps b – d.
Note: Input type events must also be selected in
Schedules to determine the active periods for each
Event.
Each stage includes a selection of inputs to activate that stage. If an input is active after a stage is
completed, the system will move to the next stage, using active inputs or repeat the current stage if it is
the last defined stage.
Schedule Start / Stop – A user defined schedule is
used to trigger a system response at the beginning or end
of a scheduled period.
a. For Schedule Start / Stop type events, select an
Alarm Schedule.
b. Select whether you’d like the response to activate
at the beginning or end of the schedule using the
toggles.
c. Select the Output Group to be used in the
response and the duration of response.
d. Click Save.
Note: Alarm schedules are setup in Schedules under the Configuration menu.