User's Guide

HMG1 Module Hyperion User Guide vX | HMG1 190221 www.wrensolutions.com Page 7 of 12
Output Groups
Create and manage groups of output devices that are activated together in event response. These groups are used in
Event setup to define the automated response for one or more devices at defined stages.
1. Open Output Groups from the Setup menu.
2. Click “+Add New”
3. When prompted, create a name for the new group and click Save.
4. Select the outputs to include by toggling Member status.
5. Select the audio file to be played when including an audio channel in the output group. Audio files are managed
in the Audio page found under the Setup menu.
6. Optionally, Test the group output response.
7. Click Save to apply changes.
Audio
Add and manage audio files for use in audio channel output.
1. Open Audio from the Setup menu.
2. Click “+Add New”
3. Select an .mp3 file and click Upload.
Note: .mp3 file format is required for all audio files.
4. Optionally, test the audio files on one or both audio channels for sound quality and volume.
System Volume: In addition to audio volume controls on the back of the Gateway, system output volume sent
to the internal amplifier can be adjusted. The default value for the system output volume is 9. This value can be
adjusted from 1 to a maximum value of 11.