User's Guide

HMG1 Module Hyperion User Guide vX | HMG1 190221 www.wrensolutions.com Page 4 of 12
Product Overview
Hyperion enables automated control of various input and output devices for intelligent, automated response to events.
This document outlines the setup and configuration of the Hyperion application. For hardware setup instruction, refer
to the product specific installation guides that are provided with the equipment.
Gateway Configuration
Gateway Discovery
The Hyperion application is hosted on the Hyperion Gateway. The Hyperion Discovery Tool is used to initially find and
connect to the gateway on the network.
1. Login to the Wren Solutions Support portal to download the
discovery tool. The support portal is located at:
http://www.wrensolutions.com/support
2. Extract the files in the Discovery zip file to a folder on a PC
3. Attach the PC to the same subnet on the local network as
the gateway
4. Click on the hyperion-discover.exe file to run it
5. Click the Discover button
6. Click on the IP address next to the desired Hyperion host.
This will launch a browser window to the Hyperion Log In
page.
Note: Hyperion is certified on the latest version of Google
Chrome and Mozilla Firefox. Microsoft Internet Explorer is not currently supported.
Log In
From the browser launched in Discovery or by entering the URL directly, log in to the Hyperion application using the
administrative credentials provided with your Hyperion installation package.
Network
From the System menu, configure the Gateway’s network settings. The default setting uses DHCP.
Date/Time
From the System menu, set the local device time using preferred method.