User manual

ManualsBrandsWR RADEMACHER ManualsDoor & Window OpenersRP-S2-700N-7

Important installation instructions

Before installation check...:

◆ ...whether your door operator is suitable for the type

of garage door and the garage door height.

◆ ...that the door is in a perfect mechanical state. The

door must be smooth running and be balanced.

Check whether it opens and closes properly;

Open the door approx. 1 metre and let go. A

balanced door should now remain in this position.

If not, have your door adjusted by a specialist

company.

◆ The door operation must not be hindered by in-

correctly adjusted springs or by incorrectly func-

tioning door suspensions or door constructions.

Before installing the drive...,

◆ ....remove all unnecessary ropes or chains and disable

any equipment, such as locks, not needed for powered

operation.

STOP

During installation there is a danger of injury

due to the unsecured door falling suddenly.

◆ During the installation work, ensure that there are

no persons in the swivelling area of the garage door.

Important instructions for a safe installation.

Follow all installation instructions carefully.

An incorrect installation can lead to serious

injuries.

Faulty installation can result in serious ac-

cidents and injuries.

◆ Fit the actuator for the emergency release at a height

of less than 1.8 metres.

◆ Use only the enclosed mounting materials and only

original spare parts and original accessories.

◆ Any existing door locking devices already ﬁtted to

the door may hinder the correct functioning of the

door and must therefore be removed.

◆ Movable parts of the garage door must not extend

into public footpaths or cycle paths.

◆ Poor lighting hinders the installation work and can

result in injuries. Ensure that there is adequate

lighting during installation work.

◆ It is possible that during the installation work, you

may not be able to open the door for a short period

of time.

◆ This drive is not to be used with doors having openings

exceeding 50 mm in diameter or having edges or

protruding parts a person could grip or stand on.

◆ Permanently ﬁx the label concerning the manual release

adjacent to its actuating member.

◆ Attach all labels so that they are clearly legible.

◆ The manufacturer is not liable for damage which

occurs due to incorrect or non-compliant use (see

warranty conditions).