User manual

48
EN
1.
SET
10 s
+
1. 2.
1.
SET
20 s
+
1. 2.
2.
10 s
2.
10 s
20 s
Switching the reversing mechanism on / off after obstacle detection
First press and hold the SET button on the cord circuit setting device (22) and subsequently press and hold the up
or down button for 10 seconds.
After 10 seconds the reversing function will be switched on or off.
Factory setting = reversing is switched on.
After approx. 10 seconds the tubular motor acknowledges switching on / off of the reversing function by briefly
starting up.
Switching the automatic roller shutter compensation mechanism on / off
First press and hold the SET button on the cord circuit setting device (22) and subsequently press and hold the up
(▲) or down (▼) button for 20 seconds.
◆ After 10 seconds, the reversing function will be switched on or off.
◆ After 20 seconds, the shutter compensation function will be switched on or off.
Factory setting = shutter compensation is switched on.
Take note of the tubular motor's reactions.
After approx. 10 seconds the tubular motor acknowledges deactivation of the reversing settings.
Continue to hold down the button:
After approx. 20 seconds the tubular motor acknowledges switching on / off of the shutter length compensa-
tion function by briefly starting up.