Instructions

EN
77
Roller shutter automatic
Indoor temperature release
Menu Settings
Use indoor temperature release
No • Yes
If „Yes“:
Type of input object
1 Bit • 16 Bit • 16 Bit target/actual temperature
If „1 Bit“:
Permits shading if bit = 1
Blocks shading if bit = 0
If „16 Bit“:
Treshold value in 0.1 ° C
-300 … (200) … 800
Hysteresis in 0.1 ° C
1 … (20) … 100
Permits shading if (MV > TV or MV = TV).
Blocks shading if MV < TV - HY
Send current blocking status
No • Yes
If „16 Bit target/
actual tempe-
rature“:
Target-actual differences in 0.1 ° C
1 … (20) … 100
The target actual is given via communication object
Hysteresis in 0.1 ° C
1 … (20) … 100
Permits shading if
(MV > target value + target actual diff) or
(MV = target value + target actual diff).
Blocks shading if
MV < target value + target actual diff - HY
Send current blocking status
No • Yes
Shading automatic
Menu Settings
Use shading automatic
No • Yes
If „Yes“: Brightness
Type of shading input
1 x 1 Bit • 1 x 16 Bit • 2 x 16 Bit • 3 x 16 Bit
If„1 x 1 Bit“:
Up-movement delay in min.
0 … (12) … 255
Down-movement delay in min.
0 … (1) … 30
If „1 x 16 Bit“
or „2 x 16 Bit“
or „3 x 16 Bit“:
Shading treshold value standard by
Parameter • Communication object
If „Parameter“:
Shading treshold value in klux
0 … (30) … 100
Up-movement delay in min.
0 … (12) … 255
Down-movement delay in min.
0 … (1) … 30
Send current shading status
No • Yes
If
„Communication
object:
The last communicated-value shall be maintained
not • after restoration of voltage • after restoration of
voltage and programming
Starting treshold value in klux valid until 1
st
communication
0… (30) … 100
Type of treshold value change
Absolute value with a 16 bit comm. object •
Increment/decrement with one comm. object •
Increment/decrement with two comm. objects
Only
“Increment/decrement with... comm. object”
Step size in klux
1 … (2) … 5
Up-movement delay in min.
0 … (12) … 255
Down-movement delay in min.
0 … (1) … 30
Send current shading status
No • Yes