Instructions

EN
71
The following chapters serve to introduce all of the functions / settings and parameters in tabular form.
The factory settings are always shown in bold type and occasionally in parenthesise between the parameters.
Example: Factory settings:
Menu Settings
Exchange Up/Down
No • Yes
Use tilting
No • Yes
Automatic length balancing of hangings
No • Yes
If „Yes“:
After the following cycle count
10 … (32) … 40
Send drive position after change
No • Yes
If „Yes“:
Transmission delay of the position in 0,1 sec
0 … (10) … 50
Notes on menu navigation
The following chapters serve to introduce the individual menus and configuration options. In each case we depict a start window and a table with the
corresponding menus and settings. Please note that some of the settings will cause the current start window to the changed, thereby displaying additional
menu items and configuration options.
Example:
A) In menu item „Roller shutter control“/“Monitor the alarm - and use barrier objects“ select the setting „No“ - then continue with
„Use alarm object“.
B) If, in menu item „Roller shutter control“/“Monitor the alarm - and use barrier objects“ the setting „Yes“ is selected, then additional
menu items and configuration options will be displayed in a window - see below for further information.
Depiction of the factory settings