User manual

62
EN
20 cm
i
Recommendation
The belt must run as straight and freely as possible. For
sti roller shutters, mount a deection roller on the belt
box. This helps to prevent unnecessary friction and wear
to the belt.
Accessories, see page 82.
3. Prepare the belt.
3.1 Cut the belt o approx. 20 cm under the belt box.
3.2. Fold the end of the belt over by approx. 2 cm and cut a
short slit in the centre. This enables you to subsequently
hook the belt onto the reel.
8.2. Preparation for installation