User manual

Operating conditions

◆ Only operate the RolloTron Basic 1100 in dry rooms.

◆ A 230 V / 50 Hz power supply, together with a site-

provided isolating device (fuse, MCB), must be per-

manently available at the installation location.

Using the RolloTron Basic 1100 for purposes other than

previously mentioned is impermissible.

7.2 Improper use

7.1 Intended use

◆ An easily accessible 230 V / 50 Hz socket must be

available at the installation site if the enclosed con-

necting cable with Euro plug is being used.

◆ The roller shutters must run up and down smoothly

and should not stick.

◆ The mounting surface for the RolloTron Basic 1100

must be at.

There is a risk to life caused through short circuiting

and electric shocks if the RolloTron Basic 1100 is

used outside.

◆ Never install or operate the RolloTron Basic 1100

outside.

7.3 Required expert knowledge of the installer

The electrical connection, installation and commission-

ing of the RolloTron Basic 1100 must only be carried

out by a qualied electrician in accordance with the

instructions in this manual.