User manual

48
EN
i
2.3 Technical Term - Denition
DIN EN 13659
"Shutters and external Venetian blinds - Performance
requirements including safety."
◆ This standard determines the performance require-
ments that externally attached shutters and blinds
must full. It also contains signicant hazards with
regard to the design, transportation, installation,
operation and maintenance of these shutters and
blinds.
Blinds
◆ Roller shutters
Obstacle detection
◆ If the roller shutters hit an obstacle in the DOWN
( t ) direction, the RolloTron Basic 1100 is switched
o, see page 53.
Overload cut-o
◆ If the drive jams in the UP ( ▲ ) direction (for example,
due to ice), the RolloTron Basic 1100 is switched o,
see page 53.
End points
◆ An end point is dened and set for each running
direction of the roller shutter. Once this point has
been reached, the RolloTron Basic 1100 switches o
and the roller shutter stops.
Running Time Limit - Transient Operation (KB)
◆ The roller shutter belt winder RolloTron Basic 1100
is not designed for continuous operation. Transient
operation dened the maximum permissible running
time, see page 54 /57.