User manual

8
EN
5. General safety information
Incorrect use leads to an
increased risk of injury.
◆ Train all personnel to use the RolloTron Comfort safely.
◆ Avoid allowing persons with limited abilities to operate
the equipment and prevent children from playing with
xed controllers.
◆ Watch the moving roller shutters and keep other peo-
ple away from the area to avoid injury in the event the
shutters suddenly slip.
◆ Undertake all cleaning work on the roller shutters with
the equipment disconnected from the mains power.
According to DIN EN 13659, it is necessary to determine that
the movement conditions for the shutters are maintained in
accordance with EN 12045. The displacement must amount
to at least 40 mm on the lower edge in the rolled-out posi-
tion with a force of 150 N in the upwards direction.
In doing so, it must be ensured that the extending speed of
the shutters for the nal 0.4 m is less than 0.2 m/s.
Exceeding the maximum permissible running time
(KB) may overload and damage the RolloTron Comfort.
◆ The maximum permissible running time for a cycle
may not be exceeded when the equipment is in opera-
tion. For this reason, the RolloTron Comfort has an
automatic running time limit (KB) of four minutes.
◆ If the running time limit is triggered, then the RolloTron
Comfort must be left for at least 12 minutes to cool
down. Full operational availability is re-established
after approx. one hour.
The mains socket and plug must be easily accessible
at all times.
i