User manual

60
EN
21. Removing the RolloTron Comfort (e.g. in the event of a move)
1.
+ + + Delete all settings.
Simultaneously press and
hold the buttons for 5
seconds.
2.
Fully close the roller shutters.
Keep the button held down.
3.
In doing so, pull out the belt as far as possible from
the top of the RolloTron Comfort.
4.
Remove the cover plate from the lower mounting
holes.
◆ You can remove the front panel by gripping the
small notch in the lower side of the device.
5.
Subsequently release the fastening screws and pull
the RolloTron Comfort completely out of the belt box.
6.
Remove the belt compartment cover.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the mo-
tor is running. Always remove the mains plug before
touching the reel compartment.
i