User manual

28
EN
17. Manual operation
Manual operation is possible in any of the modes and has
priority over the programmed automatic functions.
1.
Open the roller shutters.
Briey pressing the button causes
the roller shutters to move to the
upper end point.
2.
/ or Causes the roller shutters to
stop in the interim.
3.
Closing the roller shutters.
Briefly pressing the button cau-
ses the roller shutters to move
to the configured ventilation
position or to the lower end point.
Ventilation position, see
page 51
If the ventilation position is con-
gured, the roller shutters will rst
roll down to this position.
Pressing the [ Down ] key once
more causes the roller shutters to
continue down to the end point.
Controls