User manual

19
EN
14. Mounting the RolloTron Comfort
Mount the RolloTron Comfort as straight as possible, so
that the belt can wind correctly.
Ensure that the RolloTron Comfort sits freely in the belt
box and that it isn't in contact with the masonry, otherwise
noise will be generated during operation.
1.
Slide the RolloTron Comfort into the belt box and screw
it tight using the screws provided.
IMPORTANT
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Slide the enclosed cover plate over the lower mount-
ing holes.
i