User manual
14
EN
10. Safety instructions for electrical connection
Danger due to electric shock when working on all
electrical systems.
◆ The electrical connection and all work on electrical
systems must only be carried out by a qualied electri-
cian in accordance with the connection instruc-tions
in these operating instructions.
◆ Carry out all installation and connection work only in
an isolated, zero-volts state.
◆ Disconnect all phases of the mains power supply cable
and secure it to prevent any reconnection.
◆ Check the system for a zero-voltage status.
◆ Check that the voltage / frequency on the type plate
corresponds to local mains conditions prior to instal-
lation.
NOTE
The electrical connection for the RolloTron Standard can
be made either with the supplied connecting cable or via
a xed laid cable.
i