User manual

75
EN
18. Removing the RolloTron Swivel Winder Standard (e.g. in the event of a move)
1. Remove the cover plate from the setting buttons.
2. + +
SO
WI
Erase all settings.
Simultaneously press and hold the
buttons for 4 seconds.
3. Fully close the roller shutters.
4. Continue to press and hold the down button.
5. In doing so, pull out the belt as far as possible from the
top of the RolloTron Swivel Winder Standard.
6. Remove the mains plug from the
socket and the small appliances plug
from the RolloTron Standard swivel
winder.
i
7. Press the assembly locking device on the back part
and remove the RolloTron Swivel Winder Standard
from the wall bracket by pulling it downwards.
Assembly locking device