User manual

73
EN
Congure a closing time ( t )
(e.g. at 20:30 hours)
1. +
Simultaneously briey press the buttons.
2. The indicator light ashes and the roller
shutter travels downwards. The automatic
timer is now activated.
Your roller shutters will close automati-
cally every day at 20:30.
16.2 Switching the automatic timer on / o
If required, the automatic timer can be switched on or
o at any time.
1. Press and hold the timer button for
approx. 1 second.
2. Pay attention to the indicator light.
The indicator light ashes briey to conrm that the timer
button has been pressed. The status of the automatic
timer will then be displayed.
ON (10 seconds)
Automatic timer ON
Flashing
After power failure, if at least one switch-
ing time was previously been congured.
OFF
Automatic timer OFF
The previously congured switching
times are stored.
16.1 Conguring an opening and closing time
i
In the event of power failure, the switching
times will be extended by the duration of
the power failure, and therefore may require
reconguration.