User manual

67
EN
12. Mounting the RolloTron Swivel Winder Standard
1. Slide the RolloTron Swivel Winder Standard onto the wall
bracket from below until it engages.
The RolloTron Swivel Winder Standard may fall o
again otherwise.
WARNING!
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is not pinched or dam-
aged during the mounting process.
i
2. Re-insert the mains plug into the 230 V / 50 Hz socket.
i
Leave the bottom cover plate of the setting
buttons open until all settings have been
carried out.