User manual

Only use the RolloTron Swivel Winder Standard for open-

ing and closing roller shutters with a permissible belt.

Mechanical locks of any kind are not suitable

for automated operation with this device.

Only use original spare parts from RADEMACHER

◆ By doing so, you avoid risk of malfunctions and da-

mage to your RolloTron Swivel Winder Standard.

◆ As the manufacturer, we provide no guarantee for the

use of third-party components and accept no liability

for consequential damage resulting from such.

◆ All repairs to the RolloTron Swivel Winder Standard

must be undertaken by authorised customer service

personnel.

Using the RolloTron Swivel Winder Standard for purposes

other than previously mentioned is impermissible.

7.2 Improper use

7.1 Intended use

Operating conditions

◆ Only operate the RolloTron Swivel Winder Standard

in dry rooms.

◆ An easily accessible 230 V/50 Hz mains socket must

be available at the installation site.

◆ The roller shutters must run up and down smoothly

and should not stick.

◆ The mounting surface for the RolloTron Swivel

Winder Standard must be at.

There is a risk to life caused through short circuiting

and electric shocks if the RolloTron Swivel Winder

Standard is used outside.

◆ Never install or operate the RolloTron Swivel

Winder Standard outside.