User manual

58
EN
7. Safety instructions
Exceeding the maximum permissible running time
(KB) may overload and damage the RolloTron Swivel
Winder Standard.
◆ The maximum permissible running time for a cycle
may not be exceeded when the equipment is in
operation. For this reason, the RolloTron Standard
swivel winder has an automatic running time limit
(KB) of four minutes.
◆ If the running time limit is triggered, then the
RolloTron Swivel Winder Standard must be left for at
least 12 minutes to cool down. During this period,
the indicator light ashes rapidly. Full operational
availability is re-established after approx. one hour.
i
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must be of at least 40 mm on the
lower edge in the rolled-out position with a force of
150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the nal 0.4 m is less than
0.15 m/s.