Use and Care Manual

Herramienta Perforación para Papel Tapiz / Outil de Perforation le Papier Peint
Wallpaper
Scoring Tool
Wallpaper
Scoring Tool
Wallpaper
Scoring Tool
Won’t damage walls - when used properly
Gentle pressure is all that’s required for prodigious paper perforation!
MADE IN USA
™
Wallpaper removal can be easy! Remember these easy steps:
Score!
Spray!
Scrape!
*This tool is
unique!
Your new WP Chomp
Wallpaper Scoring
Tool is made with
100% renewable
materials including
wood pulp.
Coloration may vary
slightly between
tools.
MADE IN USA
ENVIRONMENTAL SOLUTIONS INTERNATIONAL, BATAVIA, ILLINOIS
www.chompsolutions.com [phone]
52014
WALLPAPER REMOVAL INSTRUCTIONS:
1.) Peel off top decorative layer, or SCORE wallpaper with the WP Chomp Wallpaper Scoring Tool using light pressure
(excessive pressing of tool against wall will damage drywall). More holes speeds stripper penetration, so score thoroughly.
2.) SPRAY WP Chomp! World’s Best Wallpaper Stripper to perforated wallpaper, applying from the top down. Allow WP Chomp
to dwell for 1-5 minutes.
3.)SCRAPE wallpaper from the wall surface using the WP Chomp Wallpaper Scraping Tool; starting at the top, and working
down the wall. Apply gentle forward pressure to the scraping tool (Let the tool do the work - excessive pressure will gouge
drywall). To remove remaining wallpaper paste, reapply WP Chomp Wallpaper Stripper, and sponge clean, rinsing with clean
water. Allow walls to dry completely before painting.
INSTRUCCIONES PARA QUITAR PAPEL TAPIZ:
1.) Pele apagado la capa superior decorativa, o PERFORAR papel tapiz con la Herramienta de Perforación para Papel Tapiz
de WP Chomp, usando una presión ligera. Más perforaciones mejoran la pentratión removedor. Perforar completamente.
2.) APLIQUE WP Chomp Removedor de Papel Tapiz Mejor del Mundo y dejalo por 1-5 minutos.
3.) RASPAR el papel tapiz con la Herramienta Raspador para Papel Tapiz de WP Chomp, trabajando de arriba hacia abajo la
pared. Quite el adhesivo excesivo con WP Chomp Removedor de Papel Tapiz y limpia con una esponja limpa. Lava los
paredes con agua fresca & secarse antes de pintar.