Users Manual

Woxu Wireless Co.,Ltd.

www.woxuwireless.com

record.

2．Select wireless network scan. As below:

The device will scan the AP or router that can be searched, select the SSID that needs to be

connected, and then confirm the selection button and automatically switch to the basic

settings interface, just as the below picture:

1．You can see that the Peer MAC address has been entered in the MAC of the destination

AP, if the authentication & encryption mode does not enter the authentication & encryption mode of

the destination AP, manually modify, click the application, and the binding can be generated.

2．Enter status page about the wireless item to make sure the binding is successful.