User manual

B
Insert battery with largest side towards front. 4.
Attach headlight accessory to Rovio by rst inserting the tabs in the battery 5.
compartment and then pushing down to make the headlight sit in place.
Tighten the screws to the headlight unit. Do not overtighten.6.
Removing the headlight
To remove the Rovio Headlight:
Make sure Rovio is off. 1.
Detach the headlight accessory from Rovio by removing the screws holding it in place, 2.
and then gently pulling the unit off from Rovio.
Disconnect the battery from the headlight and also from Rovio.3.
Replace the original battery compartment door and its the screws.4.
Operating the Rovio Headlight
To operate the Rovio headlight:
Access the Rovio user interface, following the instructions outlined in the 1.
Rovio User manual.
Click on the 2. Headlight button to toggle the Rovio Headlight on and off.
NOTES:
Rovio’s original headlight will also toggle on and off when you click on the • Headlight button.
Ensure the headlights are off when charging Rovio on its charging dock; otherwise, Rovio will •
not fully charge.
For complete information on using all of Rovio’s functions, refer to the Rovio User Manual included
in the Rovio package or go to www.wowwee.com.
8433US01TOP