User manual

D
2. Charging the battery pack
Before you can use Rovio, you need to install the battery pack and charge Rovio on the charging
dock. To do so:
Open the battery compartment located on Rovio’s underside. Insert and connect the 1.
battery pack (included) to the battery pack connector. Pay attention to the orientation
of the connectors.
Ensure that Rovio is turned on, and the charging 2.
dock is powered.
Place Rovio in its assembled charging dock. 3.
The LED indicators on the top of Rovio will pulse
quickly to indicate that it has begun charging.
During charging, the LEDs on Rovio will pulse 4.
slowly; a full charge for a completely depleted
battery pack should take approximately 4.5 hours
for about 1.5 hours of use.
When Rovio has nished charging the LEDs will remain lit. It is safe to leave Rovio on its
charging dock after the charge has completed.
updated for FW ver. 5.00