User manual

C
Assembling and powering the charging dock
Place the charging dock on the oor in the room 1.
you want to use as the home base.
Attach the mast to the charging dock by slotting it 2.
into position as illustrated.
Plug the power cable into the port on the back of 3.
the charging dock and then plug the power adapter
into the power outlet.
The built-in TrueTrack Beacon will light up red. If it
is not lit, touch the metal rim on the Beacon and it
will light up.
Two red dots will project light onto the ceiling. For 4.
the best signal, point the red dots at the center of
the ceiling away from unsmooth surfaces such as
lighting xtures, fans, air vents and corners.
NOTE: The red dots are guides to help you set up the
charging dock. If the red dots turn off while you are
positioning them, touch the metal rim on the Beacon
to reactivate it. During normal operation the red dots
will not be lit; the infrared lights are still on, so avoid
looking into the beacon.
TrueTrack Beacon
covers about 10-12 feet
(3 to 3.6 m) radius
Mast
Dock
TrueTrack
Beacon
Back of charging dock
Power adapter port