Instructions

6
ADVANCED OPERATION
FREE-ROaM MOdE
Roboraptor X™ will start to explore his environment autonomously in Free-Roam Mode if left
alone for more than three minutes. You can also put Roboraptor X™ into Free-Roam Mode
manually by pressing “Shift”
SHIFT
and “Demo / Roam”
DEMO
ROAM
. While Roboraptor X™ is in Free-
Roam Mode he will avoid obstacles using his Infrared Vision Sensors. Occasionally he will stop
moving to see if he can hear any sharp, loud sounds. (See “Stereo sound sensors” on page 8)
If you trigger any of Roboraptor X™’s touch sensors or press a button on the controller,
Roboraptor X™ will exit from Free-Roaxm Mode. After 5 to 10 minutes of exploration
RoboraptorX™ will power down. To wake him up press the On/Off button twice.
Note: Shift will not stop Roboraptor X™ from it’s Free-Roam Mode.
Caution: Do not put him near the edge of a table since he could fall off when he
becomes animated.
guaRd MOdE
Press “Shift”
SHIFT
and “Bite / Guard” Mode to put Roboraptor X™ into Guard
Mode.
Roboraptor X™ will perform a head rotation to conrm that he is in Guard Mode.
In Guard Mode Roboraptor X™ is using his Infrared Vision Sensors and Stereo
Sound Sensors to guard the area immediately around him. If he hears a sound
or sees movement he will react with a roar and become animated. Occasionally
RoboraptorX™ will turn his head and sniff. After 30 minutes Roboraptor X™ will
power down.
Caution: Although Roboraptor X™ will not take any steps while he is in Guard
Mode, do not put him near the edge of a table since he could fall off when he
becomes animated.