Installation Guide
Hoses
G1/2
washer
G1/2" standard pipe 
connection 
3/8"adapter included
BATH
SHOWER
BATH
SHOWER
Attach supply lines . 
Do not overtighten. 
Turn water back on.
Turn faucet handles (1) all the way on. 
Turn on hot and cold water supplies 
and flush water lines for one minute. 
Important: Thisflushes away any debris 
that could cause damage to internal parts.
1
Twist here (2)to switch 
bath to shower
Pull hoseto its furthest 
extension and hold it down into the tub. 
Turn on hot and cold water supplies and 
flush water lines for one minute. 
2
Attach hand shower to hose, 
with gasket betweenconnection.
gasket
(pre-installed
in the conical 
nut)
FLUSH SYSTEM/CHECK FOR LEAKS.
Turn on hot and cold water supplies and 
flush water lines for one minute. 
Check all connections at arrows for leaks. 
Retighten if necessary, but do not 
overtighten.


