Installation Guide
1
4
5
6
2 3
7
8
9"
(229 mm)
 1 1/8"
4" to 8"
(100mm to 203mm)
4" to 8"
(100mm to 203mm)
H C
3.5"(88mm)
3x2" 
(3x50mm)
Square
3x1.26" to 1.5"
(32mm to 38mm)
Hole Size
2"(50mm) 
Max. deck 
Thickness
G1/2
G1/2 standard 
pipe 
connection 
3/8"adapter 
included
washer
M10x1
G1/2
M14x1
Hose 59"
(1500mm)
1.26"
(32mm) 
1"
(26mm) 
 24"
(600mm)
3.5"
(90mm)
4.4"
(113mm)
4.4"
(111mm)
8.2"(208mm)
1.Insert the end valves attached with 
O-ring and the spout to bathtub holes, 
secure the end valves with washer(4), 
washer(5) and brass nut(6). Lock the 
brass nut by tightening screws.
2.Insert the shower holder attached 
with O-ring into bathtub hole, secure 
end valve with washer(7) and brass 
nut(8), tightenning the nut with screws.
OPTION: Use silicone under the base 
if deck is uneven.
1
2
3
4
5
1.Slide hose (1) through conical nut (2). 
Attach hose (1) to braided hose (3) ,
Take care of the gasket(pre-installed 
in the conical nut),
DO NOT install hand shower yet.
1.Attach hose (5) to 
braided hose (4) ,
 inch(mm)


