Specification

Table Of Contents

TWO HANDLE LAVATORY

CENTERSET FAUCETS

994339

OPERATION

• Double lever style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counter clockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counter clockwise to close)

To READ ALL the instructions completely before beginning.

To READ ALL warnings, care, and maintenance information.

Chrome/Brush nickel/ORB

You may need

Models

Finish:

For easy installation of your faucet you will need:

3x 1.8"

(45 mm)

4" to 16"

(100mm to 406mm)

9.5" to 21.5"

(240mm to 546mm)

2.5"

(63mm)

(120mm)

4.7"

(186mm)

7.3"

(105mm)

4.1"

Hot

Cold

3x1.2" to 1.5"

(32mm to 38mm)

Hole Size

1 1/4''( 32)

1.2"(30mm)

Max. deck

Thickness

9/16"

19.7"(500mm)

PAGE 1
TWO HANDLE LAVATORY CENTERSET FAUCETS Models 994339 Finish: Chrome/Brush nickel/ORB You may need For easy installation of your faucet you will need: To READ ALL the instructions completely before beginning. To READ ALL warnings, care, and maintenanceinformation. 9.5" to 21.5" (240mm to 546mm) Cold 3x 1.8" (45 mm) 1.2"(30mm) 4.1" (105mm) 2.5" (63mm) Hot 4.7" (120mm) 7.3" (186mm) 4" to 16" (100mm to 406mm) 3x1.2" to 1.5" (32mm to 38mm) Max. deck Thickness 19.
PAGE 2
1 2 1 1 3 2 4 2 5 6 3 8 7 Install spout (1) gasket (2) , Secure with washer and nut (3). Note: If sink is uneven, use silicone under the gasket. SHUT OFF WATER SUPPLIES. Slide hot (1) and cold (2) end valves with gasket (3) through sink. Secure end valves with washers (5)(6) & threaded brackets (7). Hand tighten brackets (7) onto shank (4). Lock brackets into position by tightening screw (8). 4 3 Align tabs and tabs on quick connects .