Specification

ManualsBrandsWOWOW ManualsKitchenWall Mounted Pot Filler with Double Handle in Matte Black

Table Of Contents

unit:inch(mm)

WALL MOUNTED POT FILLER FAUCETS

Application

Faucet are designed for delivering cold water from a main supply.

Faucet can be positioned above sinks or stoves and the articulated

nature of the spout enables the outlet to be conveniently positioned

above pots / pans as required.

Installation

Note:

When installing on plasterboard walls (not solid walls) it must be assured

that an appropriate reinforcement is in place to ensure sufficient strength.

Flush pipes thoroughly!

2.36''(60mm)

Ø2.6''

(65mm)

21.3''(542mm)

You may need

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is

extremely durable,

It can be damaged by harsh abrasives or polish.

To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

To READ ALL the instructions completely before beginning.

For easy installation of your faucet you will need:

To READ ALL warnings, care, and maintenance information.

1.8GPM 6.8L/min

16.6''(322mm)

4.2''

(108mm)

0.9"(23mm)

NPT 1/2

(To Wall)

G1/2

(To faucet)

2.2"(55mm)

Notice:

Cold water connection only

1" recommended hole size

1/2" IPS inlets

Notice:

Simple on/off control by rotating handle 90 (1/4 turn)

Shut off both handle cartridges when not in

use or left unattended. Improper use or inadequate

drainage below faucet may cause water damage.

8.6''(219mm)

G1/2"

OPEN

OFF

Summary of content (2 pages)

PAGE 1
WALL MOUNTED POT FILLER FAUCETS unit:inch(mm) 1.8GPM 6.8L/min You may need G1/2" 8.6''(219mm) For easy installation of your faucet you will need: To READ ALL the instructions completely before beginning. To READ ALL warnings, care, and maintenanceinformation. Application Faucet are designed for delivering cold water from a main supply. Faucet can be positioned above sinks or stoves and the articulated nature of the spout enables the outlet to be conveniently positioned above pots / pans as required.
PAGE 2
1 2 WARNING: Connect to Cold Water Only. MIN1/2" MAX 1.2"(30MM) Wrap plumber tape around pipe threads Connect to 1/2" IPS supply line. 3 Remove aerator (1) and turn faucet handles (2) to the full on position. Turn on cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Check all connections at arrow for leaks. Re-tighten if necessary, but do not overtighten.