Installation Guide
Table Of Contents
TWO HANDLE WASHERLESS
KITCHEN FAUCET
For easy installation of your
you will need:
To READ ALL the instructions completely before beginning.
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
9"(232mm)
6.3"(161mm)
7"(181mm)
4.5"(116mm)
max1.4" (50mm)
8"centers
(203mm)
4x1.15"
to 1.5"
(29mm to
38mm)
Hole Size
3"(75mm)
5"(130mm)
Ø1.7"(45mm)
2.5"(65mm)
1 2
3 4
CONNECT TO WATER SUPPLIES .
Do not overtighten.
SHUT OFF WATER SUPPLIES.
Remove old faucet. Place faucet through
mounting holes in sink.
Option: If sink is uneven, use silicone under
the escutcheon . Secure faucet to sink using
locknuts provided.
Mount spray support in far right hole
in sink.
Insert spray hose down through the
support and up though center hole of sink.
FLUSH SYSTEM/CHECK FOR LEAKS.Remove and clean aerator , turn faucet handles
all the way on. Turn on hot and cold water suppliesand flush water lines for one minute.
Important: This flushes away any debris that couldcause damage to internal parts.
Check all connections at arrows for leaks. Replace aerator
19.7"(500mm)
9/16"
G1/2

