User's Manual

Thereis no power.
Thereis no sound.
I hearbuzzingor humming.
The remote isn’t working.
• Press the POWER button on the remote control or on the front panel of your Tower speakers.
• Ensure the powercord is securely connected.
• Plug a different device into the electrical outletto verify that the outlet is working correctly.
• Increasethe volume. PressVol + on the remote control or on the front panel of your Tower speakers.
• Press MUTE on the remoteto ensurethe Tower Speakers is not muted.
• Press SOURCE on the remote or on the front panel of your Tower speakers to select a different input source.
• When using either of the Digital Inputs,if there is no audio:(A) Try setting the TV outputto PCM or (B) Connect directly
to
your Blu-ray/other source, some TVs do not pass through digitalaudio.
• On digitalinputs,the input LEDs will flash if an unsupported format ispresent. Set the source tooutput PCM.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD,not
VARIABLE. Consultyour TV’s user manual for more detailed information.
• If using Bluetooth,en sure that the volume on your source device is turned up and that the device is not muted.
• Ensure all cables and wires are securely connected.
• Connect a different source device(TV, Blu-ray player, etc) to see if the buzzing persists.If it does not,the problem may
be
with the original device.
• Connect your device to a different inputon the Tower Speakers.
• Replace the remote batteries with new ones.
• Point the remote directlyat the center of the Tower Speakers when pressinga button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application.
(e.g.,Pandoradoesn’t supportthe Back button.)
HELP& TROUBLESHOOTING