User's Manual

14. The Bolt ‘N’ Battle Attachment holds up
to 12 discs.
The foam discs simply drop in to the
attachment hopper, (see figure 14.)
An extra 8 discs come in the box.
15. Make sure that the Bolt ‘N’ Battle
attachment is on the closed position.
(See figure 15.)
To attach the Bolt ‘N’ Battle
attachment for the Dissector Discs,
simply mount the system onto the top
face of the Attacknid, (see figure 15.)
Simply plug the attachment into the
appropriate slot on top of the
Attachnid. Making sure the Bolt ‘N’
Battle attachment is facing the same
direction as the Battle Brain.
9.
6.
www.combatcreatures.com
Bolt ‘N’ Battle Attachment: Dissector Discs
19. To reload the weapon system,
simply feed the discs to the top of
the hopper. (See figure 19.)
When re-loading ensure the
Electronics Weapon Elevator is
down, and that all discs are flat and
fitted properly. This will reduce any
jamming during play.
Note: The hopper will hold 12 discs
and fire 1 disc at a time.
20. Move the Bolt ‘N’ Battle
attachment up and down, using
buttons H and I on your handset
(see figure 21.)
This controls the Electronic
Weapons Elevator up or down
changing the angle of your weapon.
NOTE: Discs will fire in a slight curving motion. It takes skill and practice to fire and hit
your target. See Trouble shooting guide (page 13) on how to maximise distance of
firing and reducing jamming of discs.
NOTE: See page 9 for details on Firing your Bold ‘N’ Battle attachment.
Firing your Weapon
18. Press Button F on the handset,
to fire your weapon system.
(See figure 18.)
Note: You can only fire the weapon
system when the Attacknid
is stationary.
14
15
18
19
20
21
NOTE: Before attaching the Bolt ‘N’ Battle attachment make sure the Auto adjustor is in
the horizontal position. Manually adjust this if necessary.