User's Manual
Insert the Electronic
Weapons Elevator
1. Unpack the Attacknid from its
packaging. Slide in the Electronic
Weapons Elevator in to the top
part of the Attacknids body,
(see figure 1.) It should sit level with
the top surface of the Attacknid.
This enables the Weapons System
to be moved up and down using the
remote control handset.
RC hand set
Small Targets
Large Targets
2.
13.
www.combatcreatures.com
Preparing for Battle
3. Position each of the vertical skins
on the uprights of the legs (there
are 6 in total).
These simply click and lock these
into position (see Figure 3).
3
2
1
Symptom
Cause
Solution
Attacknid will not sync with
the controller
1. Batteries are low
2. It is the wrong controller,
Attacknid only pairs with the
controller it comes with
1. Change batteries
2. Use original controller
1. Disc is jammed
2. Dissector Attachment is not
properly inserted
1. Remove all discs and
re-insert
2. Remove and re-attach your
weapon ensuring it is
locked in *
Weapon will not fire
1. You have the wrong battle
mode
1. Switch from ON to
Battle Mode
The Battle Brain in
not working
*Maximise Disc Firing Range!
There is considerable skill required to fire the discs long distances. The key is to time the press and release of the
fire button. To fire multiple discs keep the button pressed down. To fire single discs the maximum distance press the
fire button and release immediately after it has fired. This ensures the next disc can be fired a long distance.
Note that jamming of the weapon is more likely to occur when the fire button is released just as the disc is moving in
to the motor mechanism. This can be reduced by releasing fire button immediatly after a disc has fired.
1. It is not properly inserted 1. See this manual or website on
how to complete
Combat armor will not go on
Troubleshooting guide
Spare parts
Fore more detailed troubleshooting and to order spare parts go to
www.combatcreatures.co.uk.
Clipping on your Red skins
2. There are 6 horizontal skins
(one for each leg). 3 small and 3
larger skins.
The Larger skins go onto the larger
legs and the Smaller skins go onto
the smaller legs.
Horizontal skins simply click and lock
into place, (see figure 2.)
Red Skin set
Combat Armor
Foam discs