Instruction manual

Reciprocating saw WX80RS
13. Always check walls, floors and ceilings to
avoid hidden power cables and pipes.
14. After long working period, external metal
parts and accessories could be hot.
15. Always hold the saw firmly with both
hands when operating.
16. Only withdraw the blade from the cut
when the blade has been stopped moving.
17. The pivoting blade foot must be held
firmly against the material being cut to
reduce saw vibration, blade jumping and
blade breakage.
18. Before cutting, check the cutting line is
free of nails, screws, etc.
19. If possible, ensure the work-piece is firmly
clamped to prevent movement.
20. Never stop the cutting blade by applying
side pressure to the blade.
WARNING: Some dust particles
created by power sawing, contain
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement
and other masonry products.
• Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending upon how often you do this
type of work. To reduce your exposure
to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as those dust masks that are
specially designed to filter microscopic
particles.
SyMBOlS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
RCM approval mark