Specifications

Palm sander WX646 WX646.1
Voltage 220-240V~50/60Hz
Power input 160W
Rated no load speed 12000/min
Base size 140x140x95mm
Protection class
/ll
Net weight 0.9kg
TECHNICAL DATA
Type WX646 WX646.1 (645-649-designation of machinery, representative of palm sander)
NOISE AND VIBRATION DATA
A weighted sound pressure L
pA
= 80.8dB(A)
K
pA
3dB(A)
A weighted sound power L
wA
= 91.8dB(A)
K
wA
3dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
= 3.38m/s²
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool