Technical data

12V Li-Ion multi-purposed saw EN
2120
To reduce the risk of injury, user
must read instruction manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to rain or water
Do not burn
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
SYMBOLS OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is 2 saws in 1 tool with rep saw
and jig saw function, intended for sawing
wood, plastic, metal and building materials
while resting firmly on the workpiece. It is
suitable for straight and curved cuts.
CHARGING PROCEDURE
1. CHARGING YOUR BATTERY PACK
WARNING!
The charger and battery pack are
specifically designed to work together so do
not attempt to use any other devices. Never
insert or allow metallic objects into your
charger or battery pack connections because
an electrical failure and hazard will occur.
2. BEFORE USING YOUR CORDLESS
TOOL
Your battery pack is UNCHARGED and you
must charge once before use. When you
charge the new battery or one which has not
been used for long periods of time, it may
not reach full charge until after you have
discharged it fully in use and recharged it
several times.
3. CHARGING PROCEDURE (See Fig. A)
1) Plug the charger into an appropriate outlet.
The light (WORX LOGO)(a) will be green.
2) Insert the battery pack into the charger,
the WORX logo will be red to indicate the
charging process has started.
3) On completion of charge, the logo will turn
to be green. The pack is now fully charged,
unplug the charger and remove the battery
pack.
4. TO REMOVE OR INSTALL BATTERY
PACK (See Fig. B)
Locate the battery release buttons (11) on
side of battery pack and depress both sides
to release the battery pack from your tool.
Remove the battery pack from your tool. After
it has recharged insert the battery pack into
the battery port. A simple push and slight
pressure will be sufficient.
Li-Ion