Use and Care Manual

Lithium-Ion Cordless Circular Saw EN
12
ASSEMBLY AND OPERATION
Action Figure
BEFORE OPERATION
Removing the battery pack See Fig. A1
Charging the battery See Fig.A2
Installing the battery pack See Fig.A3
ASSEMBLY
Saw blade Assembly and
Removing
WARNING: Always
remove the battery
before changing the blade!
See Fig.B
Safety On/Off Switch
WARNING: To avoid
cutting injury from the
sharp blade, please don’t
put your hands around the
Base Plate.
See Fig. C1, C2
Cross and Rip Cutting
NOTE: To avoid injury from
Kickback, please don’t start
cutting until the blade runs
stably.
See Fig. D1, D2
Cutting Depth Adjusting See Fig. E1, E2,E3
Parallel Guide See Fig. F1, F2
Pocket Cutting See Fig. G1, G2
Sawdust Removal See Fig. H
Li-Ion
Li-Ion battery, battery must be recycled
Make sure the battery is removed prior
to changing accessories.
Wear protective gloves
Wood
Metal
Aluminium
Plastic
Tile
Incorrect
Correct
Lock
Unlock
Diamond disc
HSS blade
TCT blade
POSITEC Inc. has established a partnership with
the RBRC Corporation to recycle any Positec
batteries with the RBRC-call2recycle seal. For
environmental protection, please do not discard
batteries in the trash. After the batteries’ life cycle
is ended, please call 1-800-822-8837 for a free
service that will properly dispose of the battery.