Operation Manual

Lithium-Ion cordless hammer drill EN
7
TECHNICAL DATA
Type WX368 WX368.1 WX368.3 (3-designation of machinery, representative of
hammer drill)
Rated voltage 18V
No load speed 0-350/0-1300/min
Impact rate 0-5600/0-20800/min
Number of clutch position 20+1+1
Max torque 50N.m
Chuck capacity 13mm
Max. drilling capacity
Steel 13mm
Wood 35mm
Concrete 16mm
Machine weight 2.1kg
NOISE INFORMATION
A weighted sound pressure L
pA
:
87.3dB(A)
A weighted sound power L
WA
: 98.3dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over:
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value a
h
= 13.82m/s²
Uncertainty K = 1.5m/s²
Drilling into metal
Vibration emission value a
h
= 2.91m/s²
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.