Operation Manual

Angle grinder EN
76
WX22AG WX23AG WX23AG.1 WX23AG.2
Voltage 220-240V~50Hz 230-240V~50Hz
Power input 2300 W
Rate speed 8,000/min 6,500/min
Protection class
/II
Spindle thread M14
Disc size 180mm 230mm
Machine weight 6.0kg 5.1kg
TECHNICAL DATA
Type WX22AG WX23AG WX23AG.1 WX23AG.2 (AG-designation of machinery,
representative of angle grinder)
NOISE INFORMATION
A weighted sound pressure L
PA
: 97.6dB(A)
A weighted sound power L
WA
: 108.6dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
= 4.63m/s²
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when