Operation Manual

Oscillating Tool EN
13
NOTE: When plunging and sawing use a
slight pendulum motion, to allow sufficient
chip removal.The saw blade lasts longer if the
wear is distributed evenly. To ensure an even
distribution, loosen the saw blade, rotate it
and retighten firmly.Cut/Sand with a constant
movement and light pressure. Heavy pressure
does not increase the cut/removal rate – the
accessory merely wears faster.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Sonicrafter
®
Type WX680 (6-designation of machinery,
representative of high frequency
oscillation tool)
Function Sanding, sawing, rasping,
scraping, polishing
Complies with the following Directives,
2006/42/EC
2004/108/EC
2011/65/EU
Standards conform to:
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-4
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the technical
file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2014/11/24
Allen Ding
Deputy Chief Engineer, Testing & Certification