Technical data

4
1
2
3
4
5
6
7
8
9
10
Component list
On/off witch
Soft grip handle
Cyclonic dust box
Latching lever
Dust extraction outlet
Outer base plate
Inner base plate
Motor housing
a: Inner spot paper*(See Fig A)
b: Outer ring paper*(See Fig A)
Dust extraction adaptor(See Fig E)
* Not all the accessories illustrated or described are included in
standard delivery.
1
2
3
4
5
6
7
8
9
10
11
12
Additional safety instructions for
your sander
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Fully unwind cable drum extensions to avoid potential overheating.
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
Ensure your mains supply voltage is same as indicated on the
rating plate.
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
After long working periods external metal parts and accessories
could be hot.
Wear eye protection when operating this tool.
If possible, ensure the workpiece is firmly clamped to prevent
movement.
Your sander is a hand held tool, do not clamp your finishing sander.
Before sanding, check the area is free of nails, screws, etc.
Never stop the sander by applying a force to the baseplate.