User Manual

12
a lower setting.
When drilling in masonry and concrete choose the hammer position .
When drilling in wood, metal, plastic and screwdriver choose the drill
position .
Make the setting as follows:
1 - 4 for driving small screws
5 - 8 for driving screws into soft material
9 - 12 for driving screws into soft and hard material
13 - 16 for driving screws into hard wood
17 - 20 for driving larger screws
for heavy drilling
for drilling in masonry and concrete
SIGHT LIGHT
The sight light allows you to keep a clear view under less illuminated
circumstances. To turn on the light simply press the on/off switch.
When you release the on/off switch, the light will be off.
AUTOMATIC SPINDLE LOCK (See Fig.G)
The automatic spindle lock allows you to use the drill as a regular
screwdriver. You can give an extra twist to firmly tighten a screw,
loosen a very tight screw or continue working when the battery
energy has expired. For manual screwdriver purposes, the chuck is
automatically locked when the tool is off.
8
9
G