User Manual

2 in 1: Pole Saw / Chain Saw EN
15
When the log is supported on one end, as
illustrated in Figure IV, cut 1/3 the diameter
from the underside (underbuck). Then make
the finished cut by overbucking to meet the
first cut.
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3
When the log is supported on both ends, as
illustrated in Figure V, cut 1/3 the diameter
from the top (overbuck). Then make the
finished cut by underbucking the lower 2/3 to
meet the first cut.
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3
When bucking on a slope always stand on
the uphill side of the log, as illustrated in
Figure VI. When “cutting through”, to maintain
complete control release the cutting pressure
near the end of the cut without relaxing your
grip on the chain saw handles. Don’t let the
chain contact the ground. After completing
the cut, wait for the saw chain to stop before
you move the chain saw. Always stop the
motor before moving from tree to tree.
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3