Technical data

3 in 1 Cordless lawn mower WG780E

edges towards the ground. Assemble the components.

Ensure that the edges of the insulator washer hook

over the edge of the blade. Align the flats on the square

washer (P-4) with the flats on the shaft.

Then securely tighten the blade nut.

NOTE: If the blade and insulator washer (P-3) are

cracked or damaged, replace with new ones.

STORAGE (See Q)

Stop the mower and always remove the safety key.

Clean the exterior of the machine thoroughly using

a soft brush and cloth. Do not use water, solvents or

polishes. Remove all grass and debris, especially from

the ventilation slots.

Turn the machine on its side and clean the blade area. If

grass cuttings are compacted in the blade area, remove

with a wooden or plastic implement.

Store the machine in a dry place. Do not place other

objects on top of the machine.

To aid storage, press the handle height adjustment

knob, and rotate or fold the upper handle.